Enviar mensaje
Teléfono:
Changzhou Junqi International Trade Co.,Ltd
Changzhou Junqi International Trade Co.,Ltd

Para crear el valor para los clientes. Integridad y provechoso para ambas partes.

Inicio ProductosConductor sin cepillo del motor de DC

Conductor Board del motor de 36VDC V7.5E BLDC

Conductor Board del motor de 36VDC V7.5E BLDC

  • Conductor Board del motor de 36VDC V7.5E BLDC
  • Conductor Board del motor de 36VDC V7.5E BLDC
  • Conductor Board del motor de 36VDC V7.5E BLDC
  • Conductor Board del motor de 36VDC V7.5E BLDC
Conductor Board del motor de 36VDC V7.5E BLDC
Datos del producto:
Lugar de origen: China
Nombre de la marca: JUYI
Certificación: CE,
Número de modelo: JYQD-V7.5E
Pago y Envío Términos:
Cantidad de orden mínima: 1 sistema
Precio: Negotiable
Detalles de empaquetado: CARTÓN DEL PE BAG+
Tiempo de entrega: 5-10 días
Condiciones de pago: T/T, L/C, Paypal
Capacidad de la fuente: 10000sets/Month
Contacto
Descripción detallada del producto
Nombre de producto: Conductor sin cepillo Board del motor de DC Voltaje de funcionamiento: 36V-72VDC
Max Current: 16A Corriente de trabajo: 15A
Control de velocidad de PWM: Ciclo de trabajo 0-100% Regulación de la velocidad del voltaje análogo: 0-5V
Sin cepillo: para el motor sin cepillo de la C.C. del sensor de Pasillo Soporte técnico:
Color: Verde Salida de la señal de pulso de la velocidad:
Alta luz:

Tablero de conductor del motor del bldc 36VDC

,

tablero de regulador del motor del bldc 15A

,

tablero de conductor del motor del bldc 72VDC

JYQD_V7.5E 36-72VDC 15A Working Current 3-Phase BLDC motor driver board for Hall effect BLDC Motor

 

 

 

Specifications

Operating Voltage DC 36V
Operating current ≤20A
Output power ≤700W
Speed control 0.1V-5V or PWM input
Operating temperature -40-85℃
Operating humidity ≤90%
Protection Overload protection, locked-rotor protection, over-current protection
Functions Speed pulse signal output, soft reversing (485,CAN port optional)
Overall dimension 63X42.5X33mm (L*W*H)
Net weight 38g
Optional component

Speed regulating potentiometer

external 5 digit tachometer


 

 

 

 

 

 

 

 

 

 

Conductor Board del motor de 36VDC V7.5E BLDC 0

ATTENTION:

1: This brushless DC motor driver board is widely apply to DC Brushless with Hall sensor (120°angle) three-wire motors


2:please make sure to add heat sink when the output power more than 60W.

 
When installing the heat sink, please add insulation layer for 6pcs MOS. It will damage the driver board permanently without insulation,and also apply Heat-Conducting Silicone Grease on the insulation for better cooling.

3: As the BLDC motor factory may use different Hall sequence,if the motor start abnormal, can't start or the current getting to high, please adjust the sequence of the Hall, or the driver will be damaged.

 

4:Please offer the right voltage to the driver, do not exceed the operating range. and the driver has built-in 5V for speed control, DO NOT connect extra power supply( 5V ) into the driver for speed controlling, it will damage the driver.

 

Wiring instructions

Conductor Board del motor de 36VDC V7.5E BLDC 1

1. Control port

5V Driver board internal output voltage, external potentiometer or switch for speed adjustment and reversing operation

Z/F Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.

VR Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%

EL Enable port control. Connect 5V or no connect to allow operation, connect GND to forbid operation.

Signal Speed pulse signal output

GNDUsed for Drive board internal control

2. Power port

MA ----motor phase A

MB ---- motor phase B

MC---- motor phase C

GND ----DC-

VCC----DC +

3:Hall sensor port

Ha--- Hall a

Hb---Hall b

Hc---Hall c

GND---GND

5V---5V output

4. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.

5. Control port distance: 2.54mm,Power port distance:3.96 mm

6. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.

 

 

Conductor Board del motor de 36VDC V7.5E BLDC 2

Conductor Board del motor de 36VDC V7.5E BLDC 3

 

Mounting dimension

Conductor Board del motor de 36VDC V7.5E BLDC 4

 

Conductor Board del motor de 36VDC V7.5E BLDC 5

Conductor Board del motor de 36VDC V7.5E BLDC 6Conductor Board del motor de 36VDC V7.5E BLDC 7

We can supply extra assy for this driver board connector wires, heatsink.

Conductor Board del motor de 36VDC V7.5E BLDC 8

 

Contacto
Changzhou Junqi International Trade Co.,Ltd

Persona de Contacto: Ivanzhu

Teléfono: 0086-13961407941

Envíe su pregunta directamente a nosotros
Changzhou Junqi International Trade Co.,Ltd
No.28 Shunyuan Rd, ciudad de Changzhou, Jiangsu, China
Teléfono:86-1396-1407941
Sitio movil Política de privacidad | CHINA Bueno Calidad Motor eléctrico sin cepillo de DC Proveedor. © 2021 - 2024 bldcelectricmotor.com. All Rights Reserved.